From Buckling Springs to Cherry MX: The Story of Mechanical Keyboard Switches
· Typing Safari
Tap on an IBM Model M and you hear an unmistakable click and feel a sharp snap. Tap on a typical cheap office keyboard and you feel a quiet, soft rubber dome. Mechanical keyboards went from standard equipment to a niche and back again, and the story runs through manufacturing cost and one expired patent.
The golden age: the buckling spring
IBM patented its "buckling spring" mechanism in 1978 (US patent 4,118,611, credited to Richard Hunter Harris). A coil spring sits between the keycap and a pivoting hammer. Partway through a keypress the spring buckles, which gives the typist a tactile snap and an audible click, and it tips the hammer forward so it strikes the contact that registers the key. IBM used the mechanism in its Model F keyboards and then in the far more common Model M.
The Model M went into production in 1985, first shipping with the IBM 3161 terminal, and came with IBM PCs from 1986. Interestingly, its buckling springs strike a membrane sheet rather than a separate switch for each key. A heavy steel backplate and a strong plastic frame made it famously durable: it weighs 2 to 2.5 kilograms, and many early units still work decades later.
How rubber domes took over
Rubber-dome keyboards became very popular with computer makers who wanted to cut costs. A common membrane design has three thin layers: two carry the circuit traces, and a spacer between them keeps them apart until a dome is pressed down. Full-travel rubber dome over membrane is still the most common keyboard design made today. Rubber domes are cheap, light, and quiet, but many typists find them soft and less precise than a mechanical switch.
Cherry MX and the comeback
Cherry was founded by Walter Cherry in Illinois in 1953 and moved its headquarters to Auerbach in West Germany in 1979. Cherry's engineers Gunter Murmann and Gunter Bauer filed for a US patent on a "low profile switch" in 1983 (US Patent 4,467,160, granted in 1984), the design behind the Cherry MX switch. Cherry says the first MX switch, the MX Black, came out in 1983, and the switches were widely marketed from about 1985. Cherry rates MX switches for more than 50 million actuations and credits its gold "crosspoint" contacts for that durability.
That patent has long since expired; Google Patents lists its expiry as 2003. Cherry itself says the flood of look-alike switches on the market traces back to the expired patent protecting the original MX design. Other makers such as Gateron and Kailh now make MX-style switches and even copy Cherry's color coding, and since the mid-2000s gamers and professionals have taken up mechanical keyboards again.
Whatever switch is under your fingers, your speed still comes down to finger placement and rhythm. Typing Safari teaches touch typing on your own keyboard in its lessons, and its speed test is free with no account needed.
FAQ
What makes a keyboard "mechanical"?
Usually, a mechanical keyboard has a separate physical switch, with its own spring, stem, and contact, under each key, instead of a shared rubber-dome membrane. The IBM Model M is a famous edge case: each key has its own buckling spring, but the springs press on a membrane sheet.
Why did mechanical keyboards become popular again?
Gamers and professionals took them up again from the mid-2000s, and once Cherry's original MX patent expired, other makers such as Gateron and Kailh could sell MX-style switches too, widening the choice.
Are mechanical keyboards faster than membrane keyboards?
Mechanical switches can give clearer tactile feedback, which many typists like, but your typing technique matters much more than the switch type.